Paul Coombs -

Quick Search

Enter keyword below

Most Recent

New Listings

  • Multipurpose Drilling Rig Package

    • $90,000
    Two Drills Included
    The rig is mounted on an Isuzu NPR 400 4x4 and comes with a complete range of equipment ready to work. Mayhew Junior Rods, Core Barrels, and augers, MAC 303 Downhole hammer with a 4" bit. Included in the purchase price is a Mole P80 drill rig type 2L40C. These drills are lightweight and suitable for auger drilling and shallow coring work. They can be fitted onto a trailer ( trailer not included ) or can be mounted on a ute or truck.
  • Hanjin D8 Multipurpose Drill

    • $130,000
    Western Australia
    2018 low hour Hanjin D-8 multipurpose drill fitted with dual breakout jaws and auto SPT showing only 3074 hours from new. Fitted with a BP 265 l/min diaphragm diamond pump,15L/min high-pressure wash /foam pump all hydraulic drive and also fitted with a hydraulic oil cooler. This drill has been well maintained and is ready to go straight to work.
  • Sandvik HL1560 Drifter

    Sandvik HL1560 Drifter

    • $140,000
    Fully rebuilt Sandvik HL1560 drifter being sold with a complete head slide attached ready to install straight onto your drill. Over $90,000 was spent during the rebuild and it's in as new condition. The drifter is being sold as a complete ready-to-fit and includes spare parts and a transport/storage crate purpose-built to transport and store the drifter in. Further details are below.
  • Atlas Copco ECM660 Mk4

    • $95,000
    This is a 2010 model and the very last series of the famous ECM 660 range. These drills are at the top end of reliability and are used across a wide range of drilling assignments. Easy to operate with great visibility when doing rock bolting or ground anchor work as the boom lays over nice and low giving the operator a birds-eye view of the ground contact. They are also extremely versatile for mine and quarry operations.
  • RTD 32 DTH Drill - Brand New!

    RTD 32 DTH Drill – Brand New!

    • $1,470,000
    New South Wales
    If you're in the market for a brand new DTH drill look no more. This RTD32 drill is here in Australia and ready to go straight to work. The drill is being sold with a full and comprehensive nationwide warranty with spare parts and backup available in Australia. These drills have plenty of power being fitted with a Caterpillar C15 engine and the compressor puts out 1000 cfm and 400 psi so there's plenty of flushing power. More Details Below For the full RTD32 drill specifications click on this link - RTD32 new spec 06.2021
  • Commando DC300 Drill

    Commando DC300 Drill

    • $125,000
    New South Wales
    This Tamrock DC 300 Commando has been fully refurbished and is ready to go straight to work. The drill is fitted with a full fire suppression system and is mechanically sound. The drill stroke allows 3 mtr drill steels and the drill is fitted with a HL300 hydraulic drifter. The remote drill is also remote controlled and the handset was recently also refurbished and is in good operational condition.
  • Hydrapower Scout on Morooka

    Hydrapower Scout on Morooka

    • $165,000
    New South Wales
    If you're looking for a great geotech drill setup this is a great buy. Included in the purchase price are two Morooka track bases. One carries the drill while the other is used as a support to carry a 4000-litre water tank and all your tooling. This would be ideal for tight access and hard terrain drilling. Hydrapower PDF Specifications-
  • Schramm T660 RC Drill

    Schramm T660 Drill

    • $320,000
    If you're looking for an exploration or water boring drill this one ticks all the boxes. Fitted with an onboard Sullair 900 cfm x 350 psi compressor the drill has had a lot of work done to it to get ready to go out to work again. The standard rotation head was replaced with a rebuilt 685 Schramm head for better reliability. This Schramm T660 Drill is mounted on a twin steer Volvo truck and it's available now to purchase. Details below.

Featured Offers

Price Reduction

  • Sale!
    Atlas Copco L6C

    Atlas Copco L6C Production Drill

    • $340,000
    Atlas Copco L6C Production Drill 5289 Hours Drifter COP 4050 MUX Manufactured 2010 Started work Jan 2011 Serial Number AVO 10A241 Manufacturer Number 8991840990 The drill has completely rebuilt in May 2019 and extensively maintained
  • Sale!
    Atlas Copco 780D Drill

    Atlas Copco CM 780D DTH Drill

    • $175,000
    2005 model CM780D drill fitted with a very rare 5 meter mast setup. The drill is in very good condition and has only done 4886 hours since a new Caterpillar C13 accert diesel engine was fitted. The compressor was changed out at the same time and it's showing the same 4886 hours. The rotation head has done only 1334 hours and these drills offer great torque and depth capacity with plenty of air power available.
  • Sale!
    TEI TD75 Electric Drill

    TEI TD75 Electric Drill Package

    • $275,000
    New Zealand

    Large Inventory Of Spare Parts & Equipment

    • TEI TD75 Electric Drilling Rig in as new condition
    • showing 12 hours of use from new
    • being sold with everything you will need to do tight access drilling
    • Large Inventory Of Spare Parts & Equipment included in the purchase price of the drill
    Don't hesitate to arrange an inspection. There is a sudden increase of inquiries for drills of this calibre. Phone 0413 907 649 for any more details or to place an offer
  • Sale!
    2007 Atlas Copco ECM 660MK4 blast hole drill

    Atlas Copco ECM 660 MK4

    • $95,000

    Atlas Copco ECM 660 MK4 drill 2007

    • fitted with a Cummins QSC8.3C ( Tier 3 )
    • The total frame hours are 18514
    • a new motor being fitted at 16000 hours
    • ideal for quarry and civil works
    • plenty of life in this drill