Showing all 17 results

  • Sandvik HL1560 Drifter

    Sandvik HL1560 Drifter

    • $140,000
    Queensland
    Fully rebuilt Sandvik HL1560 drifter being sold with a<strong> complete head slide attached</strong> ready to install straight onto your drill. Over<strong> $90,000 was spent</strong> during the rebuild and it's in as new condition. The drifter is being sold as a complete <strong>ready-to-fit and includes spare parts</strong> and a transport/storage crate purpose-built to transport and store the drifter in. Further details are below.
  • Air Research Booster

    Air Research Booster

    • $60,000
    New South Wales
    Air Research booster fitted with a Detroit 8V92 diesel engine and fitted down on a heavy-duty skid. The booster has a 2" inlet and a 2" outlet. The booster is also fitted with a built-in diesel fuel tank with a capacity of 340 litres. The unit also just has a new stop/start solenoid fitted. Located in Tamworth NSW.
  • Geo Loop 30-50 Grout Pump

    Geo Loop 30-50 Grout Pump

    • $25,000
    Western Australia
    Easily the most productive grout pump in its price/power class, the Geo-Loop 30-500 comes with the experience gained from pumping thousands of bags of grout on hundreds of job sites. The hydraulically driven piston pump develops volumes up to 30 gallons per minute and pressures up to 500 PSI. It can mix and pump neat cement grouts at a rate of one bag per minute bentonite batches in under two minutes and thermal-enhanced grouts in less than three minutes per unit. Pumping power like this, plus clean up in minutes, will push your productivity to levels you just can't reach with other systems.
  • UDR 1000 Wrecking

    UDR 1000 Wrecking

    Western Australia
    Looking for offers on this UDR1000 frame and parts. Included items are listed below.
  • Epiroc CL Spare Parts Package

    Atlas Copco CL Spare Parts Package

    • $310,000 Package Price
    South Africa
    To all Atlas Copco SmartRoc CL drill owners, we have just listed a CL drifter and spare parts package that will save a small fortune on replacement parts. We can also offer in this package three Epiroc service schedule COP 5060CR 127/140-11 hydraulic drifters. The drifter history is below along with what is available in this package. These parts are located in South Africa and can be shipped to any country at a low cost.
  • Drill Rods

    Beco 4 1/2″ Drill Rods

    • $40,000
    Queensland
    Available now are 14 x Beco 7" (178mm) diameter with 4.5" thread drill rods in excellent condition. They were purchased new and only 2 lengths were used to drill only a few meters. They all have perfect threads and being sold as a job lot.
  • Cyclone Sample Splitters

    • Custom
    Queensland
    Rig Sales Australia is manufacturing a cyclone sample splitter system suitable for the Epiroc T35-T40-T45 series drills. The idea behind the sample splitters is to make your sampling requirements faster and more efficient. Instead of manually running samples through a riffle splitter away from the drill, the sample splitter does this same work automatically at the flick of a switch inside the cabin of your drilling rig.
  • Truck Trailer Mud System

    Truck Trailer Mud System

    • $180,000
    Western Australia
    Mud system unit mounted on a truck trailer. The current owner has removed some of the ancillary components such as (shakers, screens, walkways etc). If your looking for a cheap mud system this would be a good start with all the running gear operational.
  • BOP stack & coomy shack

    9” BOP stack, Xmas tree

    • $32,000
    Western Australia
    <h4 style="text-align: center;">Purchased new in 2011</h4> <p style="text-align: center;"><strong>Unused </strong></p> <p style="text-align: center;">9” BOP stack, Xmas tree and 5 bank coomy shack.</p> <p style="text-align: center;">Located in Western Australia and available for inspection.</p>
  • Rebuilt Blastcrete Mason Mate Mixing

    Rebuilt Blastcrete Mason Mate Mixing Unit

    • $15,000
    Western Australia
    <p style="text-align: center;"><strong><span style="color: #333399;">Fully rebuilt and had a new engine fitted in 2016</span></strong></p> <p style="text-align: center;">Built for productivity with a D3522 hydraulic squeeze pump and our high-shear continuous mixer, plus it’s powered by a 38 -horsepower Briggs and Straton petrol engine.</p>
  • Compressor Cooler OEM Suit D40KS Drill

    Compressor Cooler OEM Suit D40KS Drill

    • $4,500
    Western Australia
    <h4><span style="color: #333399;">Compressor Cooler OEM Suit D40KS Drill</span></h4> <ul> <li><span style="color: #008000;"><strong>Compressor cooler unit refurbished by COR radiators in Perth</strong></span></li> <li><span style="color: #008000;"><strong>part number 018338 - 059</strong></span></li> <li><span style="color: #008000;"><strong>The cooler is in great condition and was never used after the refurbishment</strong></span></li> <li><span style="color: #008000;"><strong>AU$4 500 +GST and open to offers.</strong></span></li> <li><span style="color: #008000;"><strong>Huge saving on replacement unit!</strong></span></li> </ul>
  • Radiator Cooler Unit Suit Driltech D40K

    Radiator Cooler Unit Suit Driltech D40K

    • $4,000
    Western Australia
    <h4><span style="color: #333399;">Radiator Cooler Unit in great condition</span></h4> <ul> <li><span style="color: #008000;"><strong>Suits a Driltech D40K or can be used on any 700hp engine set up.</strong></span></li> <li><strong>AU$4 000 + GST and will listen to offers </strong></li> <li><strong>Sitting in Western Australia awaiting inspection</strong></li> </ul>
  • Hose Press Combination

    Complete Hose Press Combination

    • $17,500
    Queensland
    <h4><span style="color: #333399;">Located in Queensland!</span></h4> <ul> <li><span style="color: #008000;"><strong>Listed @ AU$17 500</strong></span></li> <li><span style="color: #008000;"><strong>Complete hose press operation </strong></span></li> <li><span style="color: #008000;"><strong>Including all dies and hose cutting machine. </strong></span></li> <li><span style="color: #008000;"><strong>All in good condition and selling as a complete package. </strong></span></li> <li><span style="color: #008000;"><strong>The press and cutter are 240 volts and its available now.</strong></span></li> </ul>
  • Sandvik D40KS Hydraulic Cooler Pack

    Sandvik D40KS Hydraulic Cooler Pack

    • $3,000
    Western Australia
    <h4 style="text-align: left;"><span style="color: #333399;">NEW!</span></h4> <h4 style="text-align: left;"><span style="color: #333399;">Never Used</span></h4> <p style="padding-left: 40px; text-align: left;"><strong>Massive savings</strong> on replacement price with this hydraulic cooler pack to suit a <strong>Sandvik</strong> D40KS drill.</p> <p style="padding-left: 40px; text-align: left;"><strong><span style="color: #ff0000;">OEM part number - 018338- 058</span></strong></p>
  • Drill Rod Trailer Purpose Built Large Diameter

    Drill Rod Trailer

    • $15,000
    Northern Territory
    <h4><span style="color: #333399;">Drill Rod Trailer Purpose Built Large Diameter </span></h4> <ul> <li><span style="color: #008080;">T</span><strong>his trailer was purpose-built for carrying additional large diameter drill pipe around mine sites</strong></li> <li><strong>Built to supply a D75 rotary drill with extra drill rods</strong></li> <li><strong>Capable of various drill pipe sizes.</strong></li> <li><strong>Located Northern Territory</strong></li> <li><strong>These are very handy when extra rods are required</strong></li> <li><strong>AU$15 000 Offers Welcomed</strong></li> <li><strong>Call for information 0413 907 649</strong></li> </ul>
  • Blast hole Cyclone Sample Splitter to Suit Most Makes

    Blast Hole Cyclone Sampling Splitter

    • $9,500
    Australia
    <span style="color: #333399;"><strong>Rig Sales Australia</strong> </span>can supply this simple and cost-effective way to split samples through the sample retrieval process. These <strong>Australian made</strong> <span style="color: #000000;">units can be adapted to suit most makes and models of drill and blast drills and is an easy conversion.</span> <span style="color: #000000;">No need to spend tens of thousands of dollars when it can be fitted easily and at a fraction of the cost.</span> Based on the original Tamrock / Sandvik cyclone splitters, these units<span style="color: #000000;"> have been used for decades and have</span> proved to be reliable and efficient. <span style="color: #000000;">The sample splitters are supplied with all fittings to mount to your cyclone quickly and easily.</span> These are quality Australian built strong units that will not let you down.  
  • Atlas Copco 4050 MEX Drifter

    Atlas Copco 4050 MEX Drifter plus spare parts.

    • $45,000
    <h4>Fully refurbished 4050 drifter recently overhauled by Atlas Copco</h4> <ul> <li>Atlas Copco 4050 MEX Drifter plus spare parts</li> <li>We have all the receipts and a work description undertaken on the drifter.</li> <li>This is great value and selling at a well below replacement price.</li> <li>Going with the drifter is a <strong>crate of 4050 MEX used parts</strong> that would make up to 70% of a complete drifter.</li> <li>Easily build another drifter cheaply or use the parts as spares to the overhauled unit.</li> </ul>