Showing all 6 results

  • Ingersoll Rand DML/HP

    • Under Offer
    Queensland
    3 x Ingersoll Rand DML/HP - 1450 rotary drills available to purchase. The drills, spare parts and consumables to suit the drills are being sold as a complete and comprehensive package. This is a great opportunity to pick up three drills at heavily reduced prices with everything you would ever need to run these drills for years to come. All drills have 35 ft masts and have a drilling capacity of 54.9 meters in 152-250mm or 270mm rotary.
  • Ingersoll Rand ECM 720

    • $50,000
    Queensland
    Ingersoll Rand ECM 720 drill is ideal as a parts machine. Still runs and is fitted with a Montabert HC200 drifter. The drill is being sold cheap as it does need some work done to it. If you're running an Ingersoll Rand 720 this would be a great buy as a parts machine.
  • Ingersoll Rand ECM 720

    • $80,000
    Queensland
    Ingersoll Rand ECM 720 drill has just come off a job recently and it's been a very good running machine. The drill needs to have things like the boom pins and bushes done, but it has been a reliable drill and just needs some servicing and it will be a great drill for quarry works.
  • Atlas Copco 780D Drill

    Atlas Copco CM 780D DTH Drill

    • $195,000
    Queensland
    2005 model CM780D drill fitted with a very rare 5 meter mast setup. The drill is in very good condition and has only done 4886 hours since a new Caterpillar C13 accert diesel engine was fitted. The compressor was changed out at the same time and it's showing the same 4886 hours. The rotation head has done only 1334 hours and these drills offer great torque and depth capacity with plenty of air power available.
  • Ingersoll Rand DML 40

    Ingersoll Rand DML 40

    • $40,000
    Fitted with refurbished <strong>Mammoth breakout assembly</strong>. Epiroc recently overhauled the rotation head and it's only done 4000 hours since. This drill is set up for 6” and 7” pipe 265-229mm diameter holes 10.7M Single pass. Could be purchased as a rebuild project, or as a parts machine.
  • Sale!

    Ingersoll Rand Drill ECM720

    • $150,000 $130,000
    Queensland
    <h4><span style="color: #333399;">Ingersoll Rand ECM720 Drill</span></h4> Very original Ingersoll Rand ECM720 fitted with all <strong>new hydraulic pumps</strong> and the drifter has only recently been resealed and serviced. <strong>Current owner has just gone through the machine and replaced -</strong> <ul> <li>Auto greaser</li> <li>New fuel delivery pump</li> <li>New muffler fitted</li> <li>The centralisers  have just been re-bushed</li> <li>New feed chain pulley including the bushes and pins</li> <li>Total hours are 13500, and this is a reliable drill ready to go straight to work.</li> <li>Priced to sell and ready to load.</li> </ul>