This is a custom-built air core drill that has low engine hours of 3588 and is fitted with a Sullair 390CFM x 200PSI onboard compressor. The drill is in good operating condition and is being sold with some additional drilling rods, innertubes and equipment
Engine : Cummins 6 CT 8.3 – C , Power Rating 210 bhp 157 kw under rated by 25 bhp Peak Torque 567 lb-ft 769 Nm at 2,200 RPM
Compressor : Sullair series 16 , Output Rating , 390 cfm @ 200 psi Max 2,200 RPM , Required Power 110 bhp over rated by 15 bhp
Hydraulic Pumps: Twin Danfoss pumps, Required Power 90 bhp, Max
Head Drive: Hydco 250 twin drive modified, Rotation Speed 0 / 250 rpm, Torque 1,800 Nm, Travers Speed 1.2 metres per second
Pull Down : 5,000 kg
Pull Back: 7,000 kg
Drill Depth: NQ Air Core 150 metres, BQ Air Core 220 metres, Reverse Air Blast 110 metres, Diamond Core 350 metres
Cyclone: Rotary splitter speed 0 / 180 rpm, raise and lower 0 / 1 metre, arc of swing 230 degrees, Sample Collection: three-pot magazine. bag or open for bulk sample
Water Injection pump : Bean , 0 / 28 lpm @ 1,500 psi
Cooling Fans : Two-stage electric hi-flow , Fans 6 x 40 cm, Flow Rate 2,100 cfm each,
Rod Rack: Hydraulic raise and lower arc 80 degrees, up and down dump 0.8 metres: Capacity 30 NQ AC rods / 90 metres
Mast Specification : Length: 4.6 metres. Width: 0.21 metres, Depth: 0.2 metres, Arc 0 / 93 degrees, Feed Drive: hydraulic planetary with internal braking
Dump Ram: internal, Hydraulic rod clamp, make and break clamps. Head drive safety brake.
Drilling equipment details and photos displayed on Rig Sales Australia website are supplied by the owner of the equipment (the Seller).
All equipment listed is “as is, where is” unless otherwise stated. If you are unsure what this term means, you are responsible for researching its Australian legal meaning for clarity.
Rig Sales Australia and the Seller encourage and expect that the Buyer will engage in thorough physical examination pre-purchase.
No written or verbal communication can be relied definitively upon by the Buyer to fully represent the equipment. The Buyer agrees they will not hold Rig Sales Australia, its parent company or the Seller liable if they purchase any equipment based solely on the buyer's perceived or desired interpretation of the equipment description.
Inspection reports before the purchase of used drilling rigs or equipment are the responsibility of the Buyer or their assigned agent.
If the Buyer fails to inspect or have an inspection completed on their behalf before purchasing, the Buyer is accepting that there can be no legal recourse regarding the condition or functions of the equipment.
Rig Sales Australia works diligently towards a fair and positive outcome for both seller and buyer. To maintain a fair and transparent process for all parties, Rig Sales Australia has applied a stringent and secure listing and sales procedure in place. No party is exempt from fulfilling their obligations regarding Rig Sales Australia policies.
This disclaimer forms part of the Terms and Conditions of using this website or the services of Rig Sales Australia.
See Full Terms & Conditions