Showing 1–24 of 41 results

  • Atlas Copco DML SP XL1900

    Atlas Copco DML SP XL1900

    • $500,000
    South Australia
    The Atlas Copco DML drills are always in big demand and this one has only done 4421 genuine hours and has been well maintained. Available for immediate delivery and an inspection will not be disappointed. More photos and mechanical details will be available soon.
  • Sandvik D75KX Rotary Drill

    Sandvik D75KX Rotary Drill

    • $1,600,000
    South Australia
    Here is a great opportunity to purchase a late model low hour 2018 <strong>Sandvik D75KX</strong> drill in excellent condition. Fitted with a <strong>Caterpillar C27 diesel engine</strong> and has been well maintained from new. This drill is equipped to rotary drill 229 to 279mm (9" to 11") diameter holes. More specifications below.
  • Sandvik HL1560 Drifter

    Sandvik HL1560 Drifter

    • $115,000
    Queensland
    Fully rebuilt Sandvik HL1560 drifter being sold with a<strong> complete head slide attached</strong> ready to install straight onto your drill. Over<strong> $90,000 was spent</strong> during the rebuild and it's in as new condition. The drifter is being sold as a complete <strong>ready-to-fit and includes spare parts</strong> and a transport/storage crate purpose-built to transport and store the drifter in. Further details are below.
  • Atlas Copco ECM660 Mk4

    • $95,000
    Queensland
    This is a 2010 model and the very last series of the famous ECM 660 range. These drills are at the top end of reliability and are used across a wide range of drilling assignments. Easy to operate with great visibility when doing rock bolting or ground anchor work as the boom lays over nice and low giving the operator a birds-eye view of the ground contact. They are also extremely versatile for mine and quarry operations.
  • RTD 32 DTH Drill - Brand New!

    RTD 32 DTH Drill – Brand New!

    • $1,470,000
    New South Wales
    If you're in the market for a <strong>brand new DTH drill</strong> look no more. This <strong>RTD32 drill is here in Australia</strong> and ready to go straight to work. The drill is being <strong>sold with a full and comprehensive nationwide warranty</strong> with spare parts and backup available in Australia. These drills have plenty of power being fitted with a Caterpillar C15 engine and the compressor puts out 1000 cfm and 400 psi so there's plenty of flushing power. <strong>More Details Below</strong> <em><strong>For the full RTD32 drill specifications click on this link -</strong></em> <a href="https://rigsalesaustralia.com/wp-content/uploads/2021/09/RTD32-new-spec-06.2021.pdf">RTD32 new spec 06.2021</a>
  • Sandvik 2014 DP1500i Blast Hole Drill

    Sandvik 2014 DP1500i Drill

    • $480,000
    Victoria
    2014 model Sandvik DP1500i is in excellent condition and is supplied with a full service history. Caterpillar C13 engine hours are 7444 HL1560 drifter hours are 3034. This machine is ready for work and is fitted with a Tims 3D GPS system.
  • Sandvik 2012 DP1500i Blast Hole Drill

    Sandvik 2012 DP1500i Drill

    • $430,000
    Victoria
    2012 model Sandvik DP1500i serial number 38910 is in excellent condition and is supplied with a full service history. Caterpillar C11 engine hours are 11064 HL1560 drifter hours are 4646. This machine is ready for work and is fitted with a Tims 3D GPS system.
  • Sandvik DP1500i Blast Hole Drill

    Sandvik DP1500i Drill 2012

    • $430,000
    Victoria
    2012 model Sandvik DP1500i is in excellent condition and is supplied with a full service history. Caterpillar C11 engine hours are 11360 HL1560 drifter hours are 4599. This machine is ready for work and is fitted with a Tims 3D GPS system
  • Sale!
    Terex R20T Quarry Drill

    Blast Hole Drill – Terex R20T Quarry Drill

    • $60,000
    New South Wales
    Built in 2007 with 7452 hours. Engine has less than 500 hours since being replaced and hydraulic pumps have less than 250 hours since new. Drifter is an HPR5123 and the drill is located in NSW. The engine is an <strong>Isuzu BG1</strong> and is in very good condition. Comes with a brand new cab as a spare and a spare frame with some parts also have a parts engine and optional T38 HPR4519 drifter for an extra cost. Located in NSW, contact to arrange an inspection.
  • Sandvik DR460 rotary drill rigs

    Sandvik 2011 x 3 DR460 Drill Package

    • $8,400,000
    Queensland
    Listed -  three 2011 model Sandvik DR460 rotary drills available and are all mine spec compliant for the coalfields. All three drills have a full and comprehensive service history available, and all drills are ready to go straight to work. The rigs are fully BMA/BHP compliant and are currently located in Queensland. All drills are currently configured for 7 5/8 inch pipes to drill 77 meters (251 ft). 6x 12,8 m (42 ft) pipe and holds 5 rods in the rod loader. The drills are being sold as a comprehensive package that includes a huge inventory of spare parts to suit these drills. <strong>Please scroll down to see the details below.</strong>
  • Sandvik Pantera DPi 1500 drill

    Sandvik Pantera DPi 1500

    • $460,000
    Victoria
    The Sandvik DPi 1500 series surface top hammer drill rigs are designed and built to handle drilling in quarries and open pits in the hole range of 89 – 152 mm (3 1/2 – 6”). The DPi series also suits well for large construction sites and for wall control and development works. This drill has a full-service history and is equipped with a full GPS (TIM3D) system.  
  • Sandvik DPi 1500 Blast Hole Drill

    Sandvik Pantera DPi 1500

    • $460,000
    Victoria
    The Sandvik Pantera DPi 1500 series surface top hammer drill rigs are designed and built to handle drilling in quarries and open pits in the hole range of 89 – 152 mm (3 1/2 – 6”). The DPi series also suits well for large construction sites and for wall control and development works. This drill has a full-service history and is equipped with a full GPS (TIM3D) system.
  • Epiroc CL Spare Parts Package

    Atlas Copco CL Spare Parts Package

    • $310,000 Package Price
    South Africa
    To all Atlas Copco SmartRoc CL drill owners, we have just listed a CL drifter and spare parts package that will save a small fortune on replacement parts. We can also offer in this package three Epiroc service schedule COP 5060CR 127/140-11 hydraulic drifters. The drifter history is below along with what is available in this package. These parts are located in South Africa and can be shipped to any country at a low cost.
  • Sandvik 2015 DR540 DTH Blast Hole Drills

    Sandvik 2015 DR540 DTH Drills

    • $320,000 Each
    Victoria
    Sandvik DR540 high-pressure down-the-hole (DTH) drill delivers leading penetration with an up to 34.5 bar (500 psi) compressor. The large air volumes deliver performance in pre-split and production drilling, and the heavy-duty structure allows for optional RC package for in-pit grade control. It drills blast holes with a diameter of 115 - 203 millimetres (4 ½ - 8 inches). We have four of these drills available and they have been priced to sell.
  • Service Unit Modules

    Service Unit Modules x 2

    • $35,000 Each
    Western Australia
    Self-contained service modules, built to suit a Tatra Hook truck. These units are located in W.A and are in working order. They can be converted to be fitted permanently to other truck models.
  • Drill Rods

    Beco 4 1/2″ Drill Rods

    • $40,000
    Queensland
    Available now are 14 x Beco 7" (178mm) diameter with 4.5" thread drill rods in excellent condition. They were purchased new and only 2 lengths were used to drill only a few meters. They all have perfect threads and being sold as a job lot.
  • Cyclone Sample Splitters

    • Custom
    Queensland
    Rig Sales Australia is manufacturing a cyclone sample splitter system suitable for the Epiroc T35-T40-T45 series drills. The idea behind the sample splitters is to make your sampling requirements faster and more efficient. Instead of manually running samples through a riffle splitter away from the drill, the sample splitter does this same work automatically at the flick of a switch inside the cabin of your drilling rig.
  • Sale!
    Atlas Copco F7 drill

    Atlas Copco F7 Drill

    • $75,000
    New South Wales
    Great condition 1999 Atlas Copco Coprod F7 drill ready to be put straight out to work. The drill has 1,500 hours on the new engine recently fitted. Owner has maintained the drill and it shows by the presentation. Drill is being sold with some Coprod consumables and parts.
  • Blasthole Drill Ingersoll Rand ECM 720

    Ingersoll Rand ECM 720

    • $40,000
    Queensland
    Ingersoll Rand ECM 720 drill is ideal as a parts machine. Still runs and is fitted with a Montabert HC200 drifter. The drill is being sold cheap as it does need some work done to it. If you're running an Ingersoll Rand 720 this would be a great buy as a parts machine.
  • Blasthole Drill Ingersoll Rand ECM 720

    Ingersoll Rand ECM 720

    • $60,000
    Queensland
    Ingersoll Rand ECM 720 drill has just come off a job recently and it's been a very good running machine. The drill needs to have things like the boom pins and bushes done, but it has been a reliable drill and just needs some servicing and it will be a great drill for quarry works.
  • Sandvik D40KS Drill

    Sandvik D40KS Rotary Drill

    • $420,000
    Queensland
    Plenty of money spent throughout the rebuilding and everything on the original track base has been replaced with new equipment. The seller has the crack testing reports on both the undercarriage and mast sections of this drill. If you are looking for a well-priced drill that can go straight out to work, this one is well worth a look. Inspections and overseas transport are available.
  • Atlas Copco Flexi-ROC D7-11 Drill

    Atlas Copco Flexi-ROC D7-11 Drill

    • $150,000
    Queensland
    2010 model Flexi-ROC D7-11 drill with full-service history and well maintained. Engine hours are only 8569 and the drifter is a COP 1840 showing just 3504 hours. The drill is available to inspect at any time.
  • Sale!
    Atlas Copco M2D SP18

    Atlas Copco M2D SP18

    • $340,000
    Queensland
    2013 Atlas Copco M2D SP18. Unique opportunity to purchase a completely rebuilt  M2D SP18 drill along with a healthy spare parts inventory. Rebuild took place from September 2018 to December 2018, and <strong>over $211,000.00 Australian Dollars was spent</strong> on parts and rebuild costs.
  • Terex Reedrill Drill

    Terex Reedrill SCH5000CL Drill

    • $175,000
    Western Australia
    2005 Terex Reedrill SCH 5000 CL drill showing 8500 engine hours and fitted with a reliable Caterpillar C11 engine. The drill is also fitted with the hard-hitting HPR2 drifter.